4
Chapter 1
Loading the Batteries
Two AA digital camera batteries (non-rechargeable) are included with your
camera.
1 Turn off the camera.
2 On the bottom of the camera, slide the
battery door and lift to open.
3 Insert the batteries, as shown.
4 Close the battery door.
IMPORTANT BATTERY INFORMATION
For acceptable battery life and to make
sure your camera operates
dependably, do not use alkaline
batteries.
If you purchased an optional Kodak CRV3
lithium battery, insert it as shown.
If you purchased the Kodak EasyShare
camera dock 6000 or printer dock 6000,
see page 66 for details on installing the
included Kodak EasyShare Ni-MH
rechargeable battery.
See page 14 for the other types of batteries
you can use in your camera.
AA
-
CRV3
(optional)
To Next Page
Loading...
