18
Chapter 2
Liveview—Framing with the Camera
Screen
When you turn on Liveview, the camera screen displays a live image of what the
lens sees. Use the camera screen to frame your subject.
IMPORTANT: Liveview significantly reduces battery life.
1 Turn the Mode dial to Auto .
2 Press the OK button to turn on Liveview.
3 Frame your subject in the camera screen.
4 Press the Shutter button to take the picture.
5 To turn off Liveview, press the OK button.
NOTE: If Picture Quality is set to Best (3:2) (see
page 10), the Liveview image is
displayed at a 3:2 aspect ratio, as shown,
with a black bar at the top of the screen.
To change the Liveview setting so that it is on whenever the camera is on, see
page 53.
OK
To Next Page
Loading...
