11
Chapter 1
Inserting an SD/MMC Card
Your camera has 8 MB of internal memory. However, optional SD/MMC cards
provide removable, reusable storage for pictures and videos.
CAUTION:
The card should only be inserted as explained below. If
inserted incorrectly, the door won’t close, and forcing it
may damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an SD/MMC card:
1 Turn off the camera.
2 Open the card door.
3 Orient the card as shown.
4 Push the card into the slot to seat the
connector.
5 Close the door.
To remove the card, pull it out.
See page 95 for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products. See www.kodak.com/go/cx6200accessories.
Notched
corner
To Next Page
Loading...
