Kodak EasyShare DX7590

8 www.kodak.com/go/support
2 Taking pictures and videos
Taking a picture
The camera is always ready to take pictures—in Review, Share, or Setup but
not in Favorites. (In Video mode, the camera captures video.)
1 Press the On/Off button.
2 Turn the Mode dial to the desired setting.
NOTE: Use Auto for general picture-taking situations. (See page 14 for other
camera-mode options.)
3 Use the EVF or LCD screen to frame your subject. (Press the EVF/LCD
toggle button to switch to the other. See page 6.)
The EVF /LCD screen displays a mode description and a live view.
NOTE: To take flash pictures, open the flip-up flash (see page 20). An Open Flash warning
appears on the EVF/LCD screen when the flash unit needs to be open.
4 Press the Shutter button halfway to set the
Auto Focus (AF) and Auto Exposure (AE).
The AF/AE indicator is displayed. If the focus
and/or exposure fails, recompose the shot and
try again.
5 Continue pressing the Shutter button
completely down to take the picture.
Open Flash warning
EVF screen
LCD screen
green—successful
red—failed
failed exposure
AF/AE indicator:
failed focus
AF/AE indicator