Taking pictures and videos
15
Settings apply only in P, A, S, M, and C modes
Settings you change in P, A, S or M modes apply only to pictures taken in
those modes. Settings you change in C mode apply only to pictures taken in
that mode.
For example, if you change the Color Mode to Sepia while in P, A, S, or M
mode, then Auto & Scene modes retain the default setting of Color.
NOTE: The settings, including Flash, are maintained for P, A, S, M, and C modes—even when
you change modes or turn off the camera. Use Reset to Default (see page 24) to reset
P,
A, S, M, or C
mode to its default setting.
Using the jog dial to change P, A, S, M, or C mode settings
1 Turn the Mode dial to P, A, S, M, or C.
The mode options are displayed.
2 Use the jog dial:
■ Rotate the jog dial to move the cursor.
■ Press the jog dial to open a setting.
■ Rotate the jog dial to change the setting.
■ Press the jog dial to save the setting.
NOTE: Available options are white. Unavailable options are grey. Red options are out of range
and may cause unacceptable image/print quality. Adjust the value higher or lower until it
turns yellow.
3 Press the Menu button to change other settings. (See page 21.)
4 Take a picture.
the cursor or
Rotate to move
change settings.
Press to open or
save settings.
Jog dial
To Next Page
Loading...
