Transferring and printing pictures
Direct printing with a PictBridge enabled printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need:
Camerawith fully chargedbatteries _ PictBridgeenabledprinter
USBcable(may besold separately)
Connecting the camera to a PictBridge enabled printer
1 Turn off the camera and printer.
2 Connect the appropriate USBcable from the camera to the printer. (Seeyour
printer user guide or visit www.kodak.com/go/c533accessories or
www.kodak.com/go/c503accessories.
Printing from a PictBridge enabled printer
1 Turn on the printer. Turn on the camera.
ThePictBridgelogo is displayed,followed by the currentpicture and menu. (If no
pictures are found,a messageis displayed.)If the menu interface turns off, press any
button to redisplayit.
2 Press _/_ to choose a printing option, then press the OK button.
Current Picture Press_/1_,,.to choosea picture.Choosethe numberof copies.
Tagged Pictures If your printeriscapable,print picturesthat youtaggedfor printing and
choosea print size.
Index Print Printthumbnailsof all pictures.Thisoptionrequiresoneor moresheets
of paper. If the printer is capable,choosea print size.
All Pictures Printall picturesin internalmemory,on a card,or in Favorites.Choose
the numberof copies.
Image storage Accessinternal memory,a card,or Favorites.
NOTE:Duringdirectprinting,picturesarenotpermanentlytransferredorsavedtothecomputerorprinter.
www.kodak.com/go/support _ 13
To Next Page
Loading...
