Kodak EasyShare printer dock User Manual

46
Chapter 7
Problems Transferring Pictures
Transferring Pictures
Problem Cause Action/Solution
Cannot transfer
pictures to the
computer.
The Transfer button was
not pressed.
Press the Transfer button.
The AC power adapter or
USB cable is not securely
connected.
Check the connections
(page 26) and try again.
The camera was
removed from the
printer dock during
picture transfer.
Replace the camera on the
printer dock (page 13) and
try again.
There are too many
applications running on
your computer.
Close all software
applications and try again.
The software is not fully
or correctly installed on
the computer.
1 Disconnect the USB cable
from the printer dock.
2 Close all software
applications.
3 Uninstall the software:
(page 24).
4 Re-install the Kodak
EasyShare software
(page 24).
5 Reconnect the USB cable
to the printer dock
(page 26).
urg_00041.book Page 46 Monday, August 18, 2003 10:02 AM

Kodak EasyShare printer dock Specifications

General

Print Resolution	300 x 300 dpi
Supported Paper Size	4 x 6 inches
Connectivity	USB
Compatibility	Kodak EasyShare cameras
Print Speed	Approximately 90 seconds per print
Power Source	AC adapter
Print Technology	Dye Sublimation