Doing more with your camera
www.kodak.com/go/support
19
Understanding the dual lens icon
The dual lens icon is briefly displayed when you enter or exit the ultra-wide angle
range.
Changing the flash settings
For flash settings in each mode, see page 55.
Flash mode Description
Auto
Flash
The flash fires when the lighting conditions require it.
Off The flash never fires.
Fill The flash fires every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is “backlit” (when light
is behind the subject). In low light, hold the camera steady or use a tripod.
Red-Eye The camera automatically detects and removes red-eye from the picture.
(For Red-Eye Pre-Flash, see page 32.)
IMPORTANT:
When the flash is set to Red-Eye, the camera cannot
take more than 2 pictures in quick succession. Take
more pictures when the Ready light turns green.
Entering ultra-wide
Exiting ultra-wide
Press the flash button repeatedly
to scroll through flash modes.
The current flash mode is shown
in the LCD status area.
To Next Page
Loading...
Need help?
General
