www.kodak.com/go/Z5010support 7
ENGLISH
Taking pictures in Smart Capture mode
1 Turn the Mode dial to Smart Capture .
2 Use the LCD to compose the picture
.
3 Press the Shutter button halfway to focus and set exposure.
Green
framing marks indicate successful focus. If the camera is not focusing on
the desired subject, or if red brackets or “AF” appear, release the Shutter
button and recompose the scene.
4 Press the Shutter button completely down.
The new picture is
briefly displayed. If you don’t like it, press the Delete button, then follow
the prompts.
urg_01292.book Page 7 Thursday, September 8, 2011 6:56 AM
To Next Page
Loading...
