15 www.kodak.com/go/support
Taking pictures and videos
NOTE: The settings, including Flash, are maintained for P, A, S, M, and C modes—even when you change
modes or turn off the camera. Use Reset to Default (see page 31) to reset P, A, S, M, or C mode to
its default setting.
Using the jog dial to change P, A, S, M, or C mode settings
1 Turn the Mode dial to P, A, S, M, or C.
The mode options are displayed. Available options are white. Unavailable options are
grey.
2 Use the jog dial:
■ Rotate the jog dial to move the cursor.
■ Press the jog dial to open a setting.
■ Rotate the jog dial to change the setting.
■ Press the jog dial to save the setting.
NOTE: Red options are out of range and may cause unacceptable image/print quality; adjust the value
higher or lower until it turns yellow.
3 Press the Menu button to change other settings.
4 Take a picture.
the cursor or
Rotate to move
change settings.
Press to open or
save settings.
Jog dial
To Next Page
Loading...
