35 www.kodak.com/go/support
Doing more with your camera
1 In any Still mode, press the Burst button repeatedly to choose an option.
2 Press the Shutter button halfway and hold to set the auto-focus and exposure.
3 Press the Shutter button the rest of the way down and hold it to take the
pictures.
The camera stops taking pictures when you release the Shutter button, when the
pictures are taken, or when there is no more storage space.
Using exposure bracketing
1 Set the exposure bracketing interval. (See Exposure Bracketing Interval, page 29.)
2 In any Still mode, press the Burst button repeatedly to choose .
3 Press the Shutter button halfway and hold to set the auto-focus and exposure.
4 Press the Shutter button the rest of the way down to take the pictures.
The camera takes 3 pictures. To evaluate them, press the Review button. Exposure
bracketing turns off after the pictures are taken.
Option Description Purpose
Exposure
Bracketing
The camera takes 3 pictures—one
at +, one at 0, and one at -
exposure.
Determine the best exposure level for your
conditions based on your evaluation of 3
pictures.
To Next Page
Loading...
Need help?
General
