Doing more with your camera
www.kodak.com/go/support
30
Focus Zone
Choose a large or
concentrated area of focus.
This setting remains until you
change it. The setting is
displayed on the right side of
Liveview if set to Center-zone or
Selectable-zone.
Multi-zone (default)—evaluates 3 zones to give
an even picture focus. Ideal for general picture taking.
Center-zone—evaluates the small area centered in
the viewfinder. Ideal when precise focus of a specific
area in the picture is needed.
Selectable-zone—move the focus brackets to
center, left, or right.
NOTE: For the best pictures, the camera is set to Multi-zone
when in Landscape mode.
Unavailable in Auto, Scene, or Video modes.
AF Control
Choose an auto-focus setting.
This setting remains until you
change it.
Continuous AF (default)—uses external AF sensor
and TTL (Through The Lens) AF. Because the camera
is always focusing, there is no need to press the
Shutter button halfway down to focus.
Single AF—uses external AF sensor and TTL AF
when the Shutter button is pressed halfway down.
Accessory Lens AF—uses TTL-AF.
Unavailable in Video mode.
Color Mode
Choose color tones.
In Auto and Scene modes, this
setting remains until you turn
the Mode dial.
High Color
Natural Color (default)
Low Color
Black & White
Sepia (for pictures with a reddish-brown, antique
look.)
NOTE: EasyShare software also lets you change a color
picture to black-and-white or sepia, but cannot
change a black-and-white or sepia picture to color.
Unavailable in Video mode.
Setting Icon Options
To Next Page
Loading...
Need help?
General
