Maintaining Your Printer
82 Kodak ESP 9 Printer User Guide
8 Place the new printhead into the carriage.
9 Push firmly against the target label on the printhead until you hear it click into place.
10 Reinstall the ink cartridges. As needed, see “Replacing ink cartridges” on page 76.
11 Close the printer access door. The printer should now complete a printhead calibration
to ensure that it is ready to for normal operation.
Listen carefully during this step; make
sure you hear the ink cartridges click
into place in the printhead. This seats
the cartridges properly, and prevents ink
from being dispensed incompletely on
your print or copy jobs.
To Next Page
Loading...
