Setting Up Your Printer
42 www.kodak.com/go/aiosupport
Configuring fax settings
You can adjust fax settings on the control panel. Windows users can also create a list
of frequently used Fax telephone numbers using Home Center software (for more
details, see Home Center Help, discussed on All-in-One printer Home Center
software, page 19).
Both Windows and Macintosh users can set up a list of fax telephone numbers on
the control panel by selecting
Send a Fax from the Main menu. Windows users can
also set up and maintain their Fax Phonebooks using Home Center software. For
information on setting up and maintaining the Fax Phonebook, see Fax Phonebook
entries, page 71.
Fax Settings options
Menu Options Settings / Actions
Edit Phonebook Press OK to view Fax Phonebook options
Fax Sender Information Press OK to view on-screen keyboard and enter information
Fax Auto–Answer Press or to switch setting between On/Off
Rings to Answer Press or to change setting from 1–6 rings
Redial if No Answer Press or to switch setting between Yes/No
Busy Redial Attempts Press or to switch setting from 0-12
Disable Call Waiting Press or to switch setting between Yes/No
Call-Waiting Disable Code *70 is default
Distinctive Ring
Press or to change setting
Any
Single Ring
Double Ring
Tr i pl e R i n g
Fax Speaker Press or to switch setting between On/Off
Print Fax Confirmation Page
Press or to change setting
Never
Always
After Failure Only
Print Fax Settings Press OK, then press Start
Print Fax Cover Page
Press OK, then press Start
Print Fax Activity Log
Press OK, then press Start
Dialing Mode
a
Press or to switch setting between Tone/Pulse
Error Correction
b
Press or to switch setting On/Off
To Next Page
Loading...
