www.kodak.com/go/aiosupport 79
Kodak ESP 9 All-in-One printer
Replacing ink cartridges
Your Kodak printer uses separate black and color ink cartridges. The ink levels are
shown on the control panel and in the printer software.
For the best quality prints, store ink cartridges in locations where the
temperature does not exceed 85°F (30°C).
1. Make sure the printer is turned on.
2. Open the printer access door by lifting from the recessed hand-holds on the
sides of the unit.
The printhead moves to an accessible position for handling the ink cartridges.
The ink cartridges are seated in the printhead.
Tip: A printhead alignment and a check of the inkjet nozzle can also be
initiated from the Home Center software.
Windows: Open the Home Center Help panel by clicking Help on
the Home Center window, as needed. Click
Maintenance, and then
click
Nozzle Check or Printhead Alignment.
Macintosh: Open Home Center window from the dock, and click
Maintenance, and then click Nozzle Correction or Printhead
Alignment
.
WARNING: Use genuine Kodak ink cartridges to ensure best results
and avoid printhead damage not covered under warranty.
Third-party ink cartridges may not work with your printer.
To Next Page
Loading...
