Name: Kodak ESP C315
Brand: Kodak
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Printing

28 www.kodak.com/go/aiosupport

Using default settings to print a picture

To print a picture from a memory card using the factory default settings:

1. Load photo paper (

short side first) into the center of the input tray with the

glossy side toward you (see Loading photo paper, page 22), and move the

paper-edge guides until they touch the paper.

IMPORTANT: Always load the paper short side first. The printer automatically detects

the orientation of the picture, whether it’s portrait or landscape, and prints

accordingly. If the photo paper is loaded in the wrong direction, the image

will be cut off and the paper may jam. If the paper is loaded with the wrong

side up, the image quality will be affected.

2. Insert the memory card into the memory card slot.

3. Press or to display the picture you want to print.

4. Press Start to begin printing.

The printer prints one 4 x 6 in. / 10 x 15 cm picture.

IMPORTANT: To prevent loss of data from your memory card, do not remove it from the

printer while printing.

memory card slot

Other manuals for Kodak ESP C315

Questions and Answers:

Need help?

Do you have a question about the Kodak ESP C315 and is the answer not in the manual?

General