Kodak ESP C315 - Updating Manually if Your Printer Is Connected to a Computer with MAC os

Maintaining Your Printer
64 www.kodak.com/go/aiosupport
Updating manually if your printer is connected to a computer with MAC OS
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. Select the To o l s tab.
4. Click Check for Software Updates.
5. If there are software updates, follow the on-screen instructions for updating
your software.
To u p da t e t h e f ir m w a r e :
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Open Home Center Software.
4. Select the To o l s tab.
5. Click Check for Printer (Firmware) Updates.
6. If there are updates, follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.
Doing so may cause the printer to become inoperable.