EasyManua.ls Logo

Kodak FLIK HD10 - Pairing External Devices via Bluetooth; Adjusting Focus

Kodak FLIK HD10
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN | 21
phone’s hotspot is also acceptable.
2. Open the streaming apps you want to cast on the projector and select a video to play.
3. Click the AirPlay or cast icons in the top right corner to cast to the projector.
NOTE: Be aware that copyrighted content from HULU, NETFLIX, and other similar
services CANNOT be mirrored or screencast. To view copyrighted content from these
services, download and use the oicial apps directly through the projector.
PAIRING EXTERNAL DEVICES VIA BLUETOOTH®
ADJUSTING FOCUS
External headphones or speakers can be paired to the projector via BLUETOOTH®.
Follow these steps to connect BLUETOOTH® headphones or speakers:
1. First, open the ANDROID TV™ settings by pressing the ANDROID TV™ Settings button
on the remote control.
2. Next, select “Remote & Accessories” and then select “Add Accessory.
3. Activate pairing mode on the device you want to connect.
4. Select the device you want to connect from the list.
5. Wait for the two devices to successfully pair together.
If the image on the screen appears fuzzy or unfocused when you turn the projector on,
use the focus wheel on the top to correct the image. Move the wheel left or right until

Related product manuals