Kodak HERO 5.1 - Scanning to Memory Card or USB Drive

www.kodak.com/go/aiosupport 76
KODAK HERO 5.1 All-in-One Printer
Scanning to a memory card or USB flash drive
To scan to a memory card or USB flash drive:
1. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
2. Press to select Scan, then press OK.
3. Press to select Scan to Memory Card or Scan to USB Flash Drive, then press
OK.
4. Press to select an option, then press or to change the setting.
Scan Option Settings Description
Scan What Photo
(default)
Sets the scan settings for scanning a picture
(see
Changing the scan settings for scanning
from the control panel, page 71).
Document
Sets the scan settings for scanning a document
(see
Changing the scan settings for scanning
from the control panel, page 71).
File Type JPG (default) The scanned file is saved as a JPG.
Single-page PDF The scanned file is saved as a single-page PDF.
Multi-page PDF The scanned file is saved as a multiple-page
PDF.