11
Lowering the punch assembly from the raised position
1
Attach the lifting handle to the crankshaft and slowly turn the lifting handle counterclockwise.
Continue lowering the punch assembly until the blue light turns o.
2
Return the lifting handle to its storage location.
Lifting handle
3
Push the punch assembly forward until you
hear a click. You will feel some resistance.
5
In Print Console, lock the panels.
4
Close the rear hood.
Note: If you do not push the punch
assembly fully forward, you will not be
able to close the rear hood.
Emptying the punch chip collection box
1
Pull out the chip collection box.
2
Empty the chip collection box.
3
Reinsert the chip collection box.
The blue light turns o when
the punch assembly is in its
original position.
To Next Page
Loading...
