Kodak Ngenuity 9150 User Manual

General safety guidelines for operating the scanner and handling equipment.

Procedures for installing the scanner using a USB connection.

Procedures for installing the scanner using an optional SCSI connection.

Steps to get the scanner ready to scan, including power and PC connection.

Guidelines for organizing and preparing documents for optimal scanning results.

Step-by-step instructions for manually feeding documents into the scanner.

Describes the scanner's control panel and its five main sections.

Explains the functions of the Ready, Clear/Restart, and Pause/Stop buttons.

Interpreting self-test results and viewing maintenance reminders.

Accessing scanner statistics and configuring maintenance reminders.

How to access advanced features via the VRS Interactive Viewer.

Controls scanner-specific features not accessible via Kofax VRS or application screens.

Recommended maintenance schedule and how the NOU monitors tasks.

Table detailing recommended maintenance tasks, pages, range, and symptoms.

General guidelines and precautions before cleaning the scanner or replacing consumables.

Step-by-step instructions for cleaning the pick, drive, and separation rollers.

Instructions for cleaning imaging guides and camera glass covers.

Instructions for cleaning feeder, gap, entry, pass-thru, and exit sensors.

Steps to clean the scanner transport using a cleaning sheet.

Procedures for replacing tires on pick, drive, and separation rollers.

How to perform camera calibration for consistent image quality.

Step-by-step guide to safely remove jammed documents from the scanner.

Troubleshooting issues related to hardware setup and connection.

Diagnosing and resolving common self-test and communication error messages.

Information and required details for contacting Kodak Technical Support.