A-61662 October 2011 4-13
Home screen When you click the Home button on the main Ngenuity Operator Utility
screen, the following information is displayed.
Scanner Model — displays the scanner connection status. If the
scanner is properly connected, the icon indicates a successful
connection. The scanner model and connectivity type (USB or SCSI) is
also displayed.
Imprinter Status — displays which printers are installed in the scanner,
and, for installed printers, whether an ink cartridge is detected.
The printer icon indicates imprinter configuration:
• A green check indicates the imprinter is installed and working.
• A gray X indicates an imprinter is not installed.
• A red X indicates that an imprinter is installed but not available (back
imprinter only, if pass-thru door is open).
The ink cartridge icon shows print head status:
• A green check indicates that the print head is installed and
recognized.
• A yellow ! indicates that the print head not installed or not installed
properly.
To Next Page
Loading...
