A-61662 October 2011 4-11
Feature Access Feature Access provides a way of allowing full, limited or view-only
access to the features available in the Ngenuity Operator Utility. This
feature is intended to prevent some users from changing options
inadvertently on the NOU (e.g., changing multifeed detection options).
The Lock/Unlock menu allows you to temporarily unlock or lock the
configured access (Full, Limited or View Only) for the current session
without having to reconfigure.
To configure access on the PC with the NOU installed, do the following:
1. Select Feature Access>Configure. The Configure Access Wizard
dialog box will be displayed.
2. Enter the password, Ngenuity, in the Password field and click Next.
NOTE: It is recommended that you change the Kodak-supplied
password using the Change password option after you
login the first time.
To Next Page
Loading...
