(2) Insert the Batteries and the Memory Card
1. Open the battery cover.
2. Insert the batteries into the battery compartment.
3. Insert the memory card into the slot.
4. Close the battery cover.
(3) Setting the Language/Date/Time
1. Push power switch to turn the camera on and the language menu will appear. Use the up/down/left/right buttons
to select a language, then press the (SET) button to confirm the language.
2. Use the up/down/left/right buttons again to set the date and time, and press the ( SET) button to confirm.
(4) Taking a Picture
1. Hold the camera securely.
2. Use the zoom lever to select Tele or Wide positions to zoom in or out on your subject.
3. Press the shutter button half way to focus on the subject. When the focus box turns green, press the shutter
button completely down to take the picture.
(5) Using the Mode Dial
To Next Page
Loading...
