38 3938 39
7. Turn the mode dial to switch to the custom
settings ( ).
8. The photo settings you stored the last
time are invoked.
When the mode is used for the
first time, there is no preset parameter
stored in the mode.
Under the mode, if you need to
retain or modify the set parameters
(except the parameters in ) in
restart or all modes. Please enter the
「Custom Settings」menu and select
「Yes」after setup. Otherwise, the
parameter settings are not retained in
the case of switching on/off or mode
switching.
If you want to remove the parameter
setting of 「Custom Settings」, please
see the reset function on page 85 to
operate.
5. Press the down arrow button select
「Custom Settings」and press the
button or the right arrow button to enter
the menu.
6. Select「Yes」to save or「No」to cancel.
To Next Page
Loading...
Need help?
General
