42
Display of Wi-Fi Connection Status
The Wi-Fi has successfully connected but
APP is not enabled:
Wi-Fi Mode
Connected with device
3')'JJXKYY ^^ ^^ ^^
AP mode
Disconnect
The Wi-Fi has successfully connected and
APP is enabled:
Wi-Fi Mode
Connected with APP
XXXXX
Disconnect
4. Press the
/
/
/
buttons to select and then
press the button to conirm your
selection. Enter the completion of
WPA2 PSK after password storage.
5. Connect immediately after saving.
• If connected, the LCD will display as
shown below:
Station
Wi-Fi Mode
Connected with device
SSID: XXXXXXXX
Disconnect
• If connect failed, please check Wi-Fi
device and try again.
6. After connection, click the icon of the
APP on the smart device, you may
use it to carry out relative operation.
To Next Page
Loading...
