Kodak PIXPRO AZ527

44
DSC Device
The default name of DSC Device
is「PIXPRO AZ527」. Change the name of
DSC device through key stroking.
Name between 1-18 Letters
PIXPRO AZ527
Cancel
DSC Device
Save
#!?
ABCDEFGH IJ
KL
MNO
PQ RST
UV
WXYZ
A/a
4 567 90
123
For the method of input, please refer to
the introduction on password input on
Page 41.
MAC Address
Check the wireless MAC Address of this
camera.
Settings
The name of this camera can be changed
through key stroking.
1. Select and then press the
button to enter the setting interface.
2. Press the
AC
/
C
A
button to
select the option to be adjusted and
then press the button to enter the
menu.
DSC Device
MAC Address :
PIXPRO AZ527
38:67:93:XX:XX:XX
3. Press the button to conirm settings
and then skip the menu.