Kodak PIXPRO AZ528

43
Settings
The name of this camera can be changed
under Wi-Fi® settings.
1. In other modes, press the button
and press the up/down button to select
. Press the button to enter the
menu.
2. Press the up/down button to select
and press the button or right arrow
button to enter the menu.
3. Press the up/down buttons to select
options to be adjusted and then press
the button to enter the menu.
DSC Device
MAC Address
PIXPRO AZ528_XXXX
38:67:93:XX:XX:XX
4. Press the button to conirm settings
and then skip the menu.
Disconnected from smart device Wi-Fi®:
Disconnected, please check wifi device
and try again.
Back
• Back: Back to the SSID interface.