Kodak PIXPRO AZ528

52 5352
Custom Settings
Reset camera settings to
custom settings mode.
No
Yes
7. Rotate the mode dial to switch to .
8. The photo settings you stored the last
time are invoked.
When the mode is used for
the irst time, there is no preset
parameter stored in the mode.
If you want to remove the parame-
ter setting of「Custom Settings」,
please see the reset function on
page 98 to operate.
3. Press the button and then the
AC
/
C
A
button to select ,
and press the button to enter the
menu.
4. Press the
AC
/
C
A
button to
select , and press the /
CA
button to enter the menu.
5. Press the
C
A
button to select
「Custom Settings」and then press the
/
CA
button to enter the menu.
Custom Settings
6. Select「Yes」to save or「No」to
cancel.