Kodak PIXPRO FZ53-BL - CONNECTIONS

70
Firmware (FW) Version
Use this setting to view the current camera
irmware version.
1. Press the button, press the up/down arrow
buttons to select and press the button to
enter the menu.
2. Press the up/down arrow buttons to select
and press the button or right arrow button to
enter the menu.
3. Press the up/down arrow buttons to select [FW
Version] and press the button or right arrow
button to enter the menu.
4. When there is a new irmware version in the SD
card, select [Yes] to update.
Reset
Use this setting to restore the camera to its original
factory default settings.
1. Press the button, press the up/down arrow
buttons to select and press the button to
enter the menu.
2. Press the up/down arrow buttons to select
and press the button or right arrow button to
enter the menu.
3. Press the up/down arrow buttons to select
[Reset] and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to select [Yes]
or [No] and press the button to conirm.