Kodak PIXPRO ORBIT360 4K - Page 33

32
Format
Format will clear all data stored on the memory card and will fully erase all photos and videos stored on the card.
There are 2 options:
Ù $POȗJSNÙ Cancel
To select , press the button to start formatting the card and return to the sub-menu interface after completion.
Reset Settings
Reset settings will recover and reinstall all standard product settings to the factory defaults (except for date and time).
There are 3 options:
Ù $POȗJSNÙ $BODFMÙ Reset Password
If select , press the button to start reset and return to the sub-menu interface after completion.
FW Version
The FW version will display the current firmware version installed on your camera. Press the button to return to the sub-menu interface.
 %PXOMPBEUIFMBUFTUȗJSNXBSFGSPNUIFPȘJDJBMXFCTJUF'JMFOBNF0SCJU@W;JQ
2. Copy the firmware folder to the memory card. (Two files in the firmware folder)
3. Insert the memory card into the camera. If there is a new version stored in a folder firmware on the memory card, the firmware can be updated by inserting
the memory card and updating the firmware.
There are 2 options:
Ù $POȗJSNÙ Cancel
If select , press the button to start updating the new firmware and the camera will automatically power o after completing and installing the
firmware update.
If the low battery warning appears, fully charge the battery before reattempting to update the firmware.
Date Stamp
Include a date stamp on the photo image.
There are 2 options:
Ù %BUF4UBNQ@0OÙ %BUF4UBNQ@0ū
/ / will not allow a date stamp on the photo images.