68
Waterproof Housing-C: For use with the ORBIT360 4K/4KVR360 underwater, in wet conditions or in other occasions where
waterproofing is recommended or necessary
BLUETOOTH Signal Test Button
Recording / Shooting Button
Installation Method:
1. Place base of the Waterproof Housing over the 1/4" Screw Socket on
the bottom of the camera, align the base screw to the 1/4" Screw Socket on
the camera, then tighten screw.
Waterproof
Housing Base
Positioning Mount Receptor
1/4" Screw Socket
2. Remove the two protective lens caps from the camera and wrap the Anti-
Fog Insert and Anti-Reflective Patch around the circumference of the
camera. For more details on the installation and removal of the protective
lens covers, please refer to the ORBIT360 4K/4KVR360 User Manual (
11).
Anti-Fog Insert
Anti-Reflective Patch
To Next Page
Loading...
