Kodak Pocket Portable Projector - Operating the Projector; Powering On the Projector; Playing Video Files

10
1. Turn on the Projector
Press and hold the power button to turn on the projector.
2. Playing a Video File
A. After turning on the projector, you will be prompted to select either Movies or Images.
B. Tap the Conirm button to gain access to the control panel, then use the conirm button to
select Movies.
C. You will then be prompted to select either USB or MicroSD™. Use the and buttons to
highlight the format you wish to access. Then tap the conirm button to select.
D. Use the and buttons to cycle through the list of iles. Select the ile you wish to play with the
conirm button.
3. Connect Speakers or Headphones
A. Connect your speakers or headphones
to the projector’s audio output port,
using a 3.5mm cable.
B. Adjust the volume as needed.
4. Insert MicroSD™ Card or USB Drive
Slide the microSD™ card into the microSD™ card
slot until it clicks into place. If using a USB drive,
insert it into the USB input.
6. OPERATION
B C
D