2-2 A-61816 April 2014
Installing the Kodak Driver
Software: Linux operating
systems
Linux drivers can be found on the Kodak website. Visit
www.kodakalaris.com/go/disupport to obtain the most recent Linux
drivers and installation procedures.
Install the driver software before connecting the scanner to your PC.
NOTES:
• Depending on the operating system you are installing on (Ubuntu,
Fedora, or SUSE) the installation procedures may be slightly
different.
• Kodak Scanner software requires QT3. Verify that your system has
these installed (e.g., Fedora: Applications>Add/Remove
Software).
• You must be a super user to install the software.
Installing the Kodak Driver
Software: Macintosh
operating systems
Macintosh drivers can be found on the Kodak website. Visit
www.kodakalaris.com/go/disupport to obtain the most recent Macintosh
drivers and installation procedures.
Install the driver software before connecting the scanner to your PC.
NOTE: Depending on the operating system you are installing on (10.7,
10.8, 10.9) the installation procedures may be slightly different.
Installing the input tray Install the input tray as shown below:
To Next Page
Loading...
