Koden MDC-1810P - Amendment History; Amendment Policy

AMENDMENT HISTORY
MDC-1810P/1820P Series OPERATION MANUAL
Doc No: 93142112
No. Document No & Rev No. Date(D/M/Y) Amendments
0 93142112-00 10/12/03 First issue
1 93142112-01 14/01/04
Chapter 3, para 3.6: Entered the compass safe
distance for Display and Operation unit.
Chapter 5, para 5.2: Deleted “MAP” from the key
switch, which was mistakenly printed.
2 93142112-02 25/02/04
Preface: Added “Operation of AIS.” Chapter 1, 2, 4:
Amended the power cable type name. Chapter 3:
Added AIS spec. Chapter 6: Added the descriptions
for AIS display, operation, etc. Chapter 4: Reedited
4.6.4 by adding 4.6.4.1 and 4.6.4.2 for Display
installation methods. Reedited Para. 4.7.3 to add
more details for GAIN/STC settings. Chapter 10:
Added the AIS sentence.
3 93142112-03 01/04/04
Chapter 2, 4: Added Ferrite Core.
4 93142112-04 01/06/04
Chapter 4 Added "Auto Tune Adjustment".;Cover
Address
5 93142112-05 25/08/04
Cover
6 93142112-06 08/09/04
Chapter6.4.1.7SERIAL…Chapter10.4.5 pinNO
7
8
9
10
Amendment policy
When any change is applied in the document, only the document number of the relevant sheet(s) and
cover sheet are modified and the rest of the sheets are not changed. The document number is shown in
the footer area, right or left bottom of each sheet.
○
c
2003 2004 Koden Electronics Co.,Ltd. All rights reserved.
No part of this publication may be reproduced, transmitted, translated in any form by any means without
the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this
publication are subject to change without notice. KODEN assumes no responsibility for any errors,
incidentals or consequential damages caused by misinterpretation of the descriptions contained in this
publication.