To Next Page
J
Jennifer HallSep 10, 2025
Why is SDP unavailable on my Koden Marine Radar?
- CColleen CraigSep 10, 2025
SDP is unavailable because VBW, VTG, RMA, or RMC data are not being inputted.
Why is SDP unavailable on my Koden Marine Radar?
SDP is unavailable because VBW, VTG, RMA, or RMC data are not being inputted.
Why does my Koden Marine Radar display 'AIS no OS COG/SOG data'?
The message 'AIS no OS COG/SOG data' appears because own ship’s data that is necessary for AIS are not being input.
Why is SET/DRIFT data unavailable on my Koden Marine Radar?
SET/DRIFT data is unavailable because VDR data is not being inputted.
General| Display Size | 10.4 inches |
|---|---|
| Type | Color LCD |
| Transmitter Power | 4 kW |
| Display | Color LCD |
| Frequency | 9410 MHz |
| Antenna Rotation Speed | 24 rpm |
| Range Resolution | 25 meters |
Procedures for turning the radar system on and off.
How to adjust display brilliance and operation unit brightness.
Steps to turn radar transmission ON and OFF.
Recommendations for collision avoidance using navigation data.
Setting up fan type echo alarm areas and detect levels.
Procedures for editing map areas for alarms.
Setting alarms for crossing predefined navigation lines.
Configuring vector display, CPA/TCPA alarms, and ID settings.
Enabling AIS, managing target display, outlines, and filters.
Enabling TT function, manual acquisition, and managing tracked targets.
Saving and restoring setup data, parameter resets, and total hour logs.
Procedures for diagnosing and resolving common operational problems.
