To Next Page
A
ashannonAug 28, 2025
Why TIME data is unavailable on my Koden MDC-7925P?
- MMatthew RossAug 28, 2025
If your Koden Marine Radar displays 'TIME data is unavailable,' it means that ZDA or RMC, GGA signals are not being input.
Why TIME data is unavailable on my Koden MDC-7925P?
If your Koden Marine Radar displays 'TIME data is unavailable,' it means that ZDA or RMC, GGA signals are not being input.
What does 'AIS no OS COG/SOG data' mean on Koden MDC-7925P?
If your Koden Marine Radar displays 'AIS no OS COG/SOG data,' it means that the own ship’s data necessary for AIS is not being input.
Why is HDG manual on my Koden MDC-7925P?
If your Koden Marine Radar displays 'HDG is manual,' it means there is no heading signal.
Why LAT/LON data is unavailable on my Koden MDC-7925P?
If your Koden Marine Radar displays 'LAT/LON data is unavailable,' it means the GLL, GGA, GNS, RMC, or RMA signals are not being inputted.
Why COG/SOG is manual on my Koden MDC-7925P?
If your Koden Marine Radar displays 'COG/SOG is manual,' it means there are no ground course and speed signals.
Why SET/DRIFT is manual on my Koden MDC-7925P Marine Radar?
If your Koden Marine Radar displays 'SET/DRIFT is manual,' it means there is no tide signal.
Why LAT/LON is manual on my Koden MDC-7925P?
If your Koden Marine Radar displays 'LAT/LON is manual,' it means there are no latitude and longitude signals.
What does it mean when AIS input targets exceeded the limit on Koden MDC-7925P?
If your Koden Marine Radar displays 'AIS input targets exceeded the limit,' it means the number of AIS targets exceeding the maximum of 900 has been input.
What does 'AIS targets overload (95%)' mean on my Koden Marine Radar?
If your Koden Marine Radar displays 'AIS targets overload (95%),' it means the number of AIS targets being input has exceeded 855.
What does 'Tracked targets overload (95%)' mean on Koden MDC-7925P Marine Radar?
If your Koden Marine Radar displays 'Tracked targets overload (95%),' it means the number of tracking targets has exceeded 95.
General| Power Supply | 12/24 V DC |
|---|---|
| Type | Marine Radar |
| Frequency | 9410 MHz (X-band) |
| Rotation Speed | 24 rpm |
| Display | LCD |
Safety guidelines for operating the radar system.
Essential steps and guidelines before installing the radar system.
Step-by-step guide for installing the radar antenna scanner unit.
Guidance on installing the radar display unit.
Accessing maintenance settings and changing the system password.
Initial setup and adjustment procedures for radar operation.
Key calibration steps for optimal radar performance.
Configuring input/output interfaces for external sensors and devices.
Setting up inputs for heading, speed, and position data.
Procedures for saving and loading system configuration data.
Understanding and clearing system alarms and operation notes.
Step-by-step guides and flow charts for diagnosing malfunctions.
Diagnosing problems related to power, display, and antenna unit.
Resolving issues with radar echoes, sensitivity, and data reception.
Troubleshooting AIS system errors and antenna unit failures.
Detailed steps for replacing the magnetron in RB808P and RB809P models.
