What does it mean when a tracked target exceeded the CPA/TCPA limit on my Koden MDC-7925P?
If your Koden Marine Radar displays 'Tracked target exceeded the CPA/TCPA limit,' it means a tracked target has turned into a dangerous target.
What does it mean when an AIS target exceeded the CPA/TCPA limit on my Koden Marine Radar?
If your Koden Marine Radar displays 'AIS target exceeded the CPA/TCPA limit,' it means an AIS target has turned into a dangerous target.
Why is my Koden MDC-7925P auto acquiring a radar target?
If your Koden Marine Radar is auto acquiring a radar target, it is because a target entered into the auto acquisition area.
What does 'Test alert only' mean on my Koden Marine Radar?
If your Koden Marine Radar displays 'Test alert only,' it indicates that it is under alert test.
General| Power Supply | 12/24 V DC |
|---|---|
| Type | Marine Radar |
| Frequency | 9410 MHz (X-band) |
| Rotation Speed | 24 rpm |
| Display | LCD |
Safety guidelines for operating the radar system.
Essential steps and guidelines before installing the radar system.
Step-by-step guide for installing the radar antenna scanner unit.
Guidance on installing the radar display unit.
Accessing maintenance settings and changing the system password.
Initial setup and adjustment procedures for radar operation.
Key calibration steps for optimal radar performance.
Configuring input/output interfaces for external sensors and devices.
Setting up inputs for heading, speed, and position data.
Procedures for saving and loading system configuration data.
Understanding and clearing system alarms and operation notes.
Step-by-step guides and flow charts for diagnosing malfunctions.
Diagnosing problems related to power, display, and antenna unit.
Resolving issues with radar echoes, sensitivity, and data reception.
Troubleshooting AIS system errors and antenna unit failures.
Detailed steps for replacing the magnetron in RB808P and RB809P models.
To Next Page