Change the range/gain of the lower screen in the
PPI/PPI. ([GAIN] knob)
10
LCD BRILL
PANEL BRILL
10
5.0
SUB-SCREEN RANGE
SUB-SCREEN GAIN
5.0
ENT
ENT
ENT
MENU
MENU
RANGE
GAIN
GAIN
GAIN
TX
STBY
BRILL
MENU
BRILL BRILL
BRILL
MENU
TX
STBY
ENT
MENU
RANGE
GAIN
TX
STBY
BRILL
PRC
1
6
7
8
9
2
3
4
5
By keep pressing the [F1] / [F2] key, a function assigned
to each key can be selected.
0093142134-02
Range
Range Rings Interval
Mode
H UP: Head Up
N UP: North Up
C UP: Course Up
WPT UP: WPT Up
RM: Relative Motion
TM: True Motion
Pulse
Short Long
SP < M1 < M2 < L1 < L2
Off Center State
[FTC], [Mode], [Display Select], [Off Center],
[Enhance], [Trail Time], [EBL], [VRM], [Color],
[PI (Parallel Cursor)], [Alarm Mode], [ACQ], [Delete],
[POB], [Target], [Other Ship], [Pulse], [Process]
SPD
Heading
State of [F1]/[F2] key assignment
Display Setting Information
FTC set value
Trail Time
Alarm Mode
Sleep Setting
Interference Rejection Setting
Enhance Setting
PROCESS: OFF/ON
When set to OFF, the data is not displayed.
series Quick Reference
The operation differs depending on the
preset function.
Operate while referring to the operation
guide on the display.
Execute the preset function. ([F1] / [F2] keys)
Press
Functions which can be preset to [F1] / [F2] keys
Change the range. ([- RANGE +] key)
Press [+] The observation range is widened.
(The image shrinks.)
In PPI/PPI, the upper and lower screens change
simultaneously.
Press [
-
] The observation range is narrowed.
(The image expands.)
Adjust the STC. ([STC] knob)
When rotating clockwise the [STC] knob, the
effect of suppressing the reflection from sea
surface becomes stronger.
When rotating counterclockwise the [STC]
knob, suppressing the reflection from sea
surface becomes weaker.
To clear the CCD camera video, press any other key.
Rotate
Rotate
Display the video of CCD camera. ([STC] knob)
The video of the CCD camera is displayed.
The [LCD BRILL] and the [PANEL BRILL] are
toggled by pressing the [BRILL] key.
The full screen and the half screen are
toggled by pressing the [STC] knob.
Press
Start the transmission. ([STBY/TX] key)
Press
The transmission starts, and the picture is
displayed.
To stop the transmission, press the [STBY/TX] key
again.
Adjust the brilliance. ([BRILL] key)
Press
Press
Press
+ cursor information
heading line
own ship’s
position
+ cursor
own ship’s information
When releasing the [ENT] key, the heading line
appears again, and the + cursor returns to the own ship
position,
Delete the heading line. ([ENT] key)
Keep pressing
While pressing the [ENT] key,
the heading line disappears.
Measure the distance/heading of 2-points. ([ENT] key)
Press Press Press
The cursor
moves.
The origin
is set.
The distance/direction
from the origin to the
+ cursor is displayed.
Press the [MENU] key to finish.
Open the menu. ([MENU] key)
Press
Press
Press
Press
Press
The menu is displayed.
Press the [MENU] key again to close the menu.
(For the menu, see the back side.)
When rotating clockwise the [GAIN] knob,
the gain increases.
When rotating counterclockwise the [GAIN]
knob, the gain decreases.
Adjust the gain. ([GAIN] knob)
The [SUB-SCREEN RANGE] and the
[SUB-SCREEN GAIN] are toggled by pressing the
[GAIN] knob.
Turn on/off the power. ([BRILL] key)
Turn on the power. Turn off the power.
Turn off the power. Keep pressing
the key for more than 3 seconds.
FTC 3
ALM IN
SLP 5M
IR 2
ENH 1
TRAIL 6M
M 1
OFF
CENT
FTC 3
ALM IN
SLP 5M
IR 2
EBL
F1
F2
VRM
ENH 1
TRAIL 6M
CURS
PRC
To Next Page
Need help?
General
