Kodiak X2 User Guide
7
READING THE LCD
LCD Image Key
A Power Input Icon Appears anytime there is a power source connected
B Battery Level Dial Displays estimated battery level expressed as a dial
C Power Output Icon Appears anytime there is a load (AC or DC)
D Alarm Icon Appears whenever there is a fault or alarm (i.e. low
battery voltage)
E Power Output Reading Total combined power output (AC + DC) measured in
watts.
F Estimated Run Time Reading Estimated run time remaining at current output level
measured in hours. Run times >9.9 hours the display
will simply remain at 9.9 hours.
G Power Output Icon 2 Appears anytime there is a load (AC or DC)
H AC Frequency Reading Measures AC output frequency
I AC Voltage Reading Measures AC output voltage from the inverter
J Dualink Parallel Mode Icon Displays only when Dualink Parallel Mode is on
K State of Charge Reading Displays estimated state of charge (SoC) as a percentage
L Power Input Icon 2 Appears anytime there is a power source connected
M Est. Time Reading Estimated time until fully recharged at current input level
measured in hours. Recharge times >9.9 hours the
display will simply remain at 9.9 hours.