Kodiak X2 User Guide
3
IMPORTANT SAFETY GUIDELINES
NEVER connect an input exceeding 65 volts, i.e. the open circuit voltage (VOC) on solar input,
to the blue EC8 charging port (left side) on the Kodiak X2.
NEVER exceed output and input connector ratings. Failure to do so may result in unit damage,
fire, or electrical shock. You can find these ratings under Tech Specs.
NEVER store a Kodiak X2 in hot environments, such as a hot vehicle. Lithium batteries are sen-
sitive to extremely high temperatures. For more information see Tech Specs.
NEVER touch, stick metal objects into, or otherwise come in contact with the interior of the AC
outlets on the Kodiak X2. Doing so risks death, serious injury, and electrical shock. These out-
lets supply power comparable to that of a normal home wall outlet and, while ungrounded,
still present many of the same dangers.
NEVER allow the Kodiak X2 to get wet. Allow any condensation to dry completely before pow-
ering-up or charging your Kodiak X2. If your system does get wet, contact us to ensure it’s safe
before attempting to use it again.
NEVER attempt to repair your Kodiak X2 or replace the internal battery yourself; any manipu-
lation or disassembly will void all warranties. Any tampering with the warranty stickers (black
dot with Inergy logo) may also void the warranty. For questions about repair/service, please
contact our U.S.-based Tech Support team (see Contact Us). There are no user-serviceable parts
inside.
ALWAYS keep your Kodiak X2 clean and dry. Regularly inspect for dirt, dust, or moisture. You
may clean connectors, outlets, and fans with canned air for electronics. Never use an air com-
pressor to clean or dust-off your system.
NEVER use a generic or off-brand charger to charge your Kodiak X2. Use only Inergy-supplied
chargers specifically for this device.
NEVER connect your Kodiak X2 AC outlets to another power source (i.e. attempt to charge your
Kodiak X2 via the AC outlets). Doing so will permanently damage your device and void your
warranty. These outlets are output only, and any such damage is easily detected when
diagnosing system failures.
BE AWARE that the Kodiak X2 can get hot when in use. Charge your Kodiak X2 in a well venti-
lated, dry area.
NEVER use or store a Kodiak X2 in any orientation other than standing straight up. The Kodiak
X2 is designed to be stored and operated while sitting on a flat, secure surface.
ALWAYS secure the Kodiak X2 with straps or cords when using it in a vehicle to protect against
excessive vibration or impacts.
To Next Page
Loading...
Need help?
General