KV1000 Constant Temperature Kinematic Viscosity Bath
Operation and Instruction Manual
- 5 -
4. Descriptions
4.1. Instrument Description
Figure 1. Instrument Descriptions
1. Temperature Controller (See section 4.2 for detailed operation)
2. Coolant Outlet/Inlet (Sold Separately)
3. Temperature Sensor
4. Pyrex Glass Bath
5. Heating Coil
6. Viscometer Port
7. Thermometer/Thermocouple Port
All wetted parts are corrosion resistant 300 series stainless steel.
4.2. Accessories for Running Tests
Glass Capillary Viscometer Tubes for KV1000
Koehler offers a full selection of glass capillary kinematic viscometers, which are ordered separately from the KV1000
instrument, for measuring kinematic viscosity of liquid products as per ASTM D445 and related standard test methods. All
types of viscometers conform to ASTM D445 and related methods for glass capillary kinematic viscometers. All viscometers
with part numbers for the automatic test are listed below. The constant for each individual viscometer is written on the
Certificate of Calibration, included in the packaging.
IMPORTANT: It is recommended when using a new viscometer for the first time to run a test with suitable standard. Different
locations may result in a slightly different constant.
To Next Page
Loading...