K71000 Automatic PMCC Flash Point Analyzer
Operation and Instruction Manual
K71000-Manual -22-
Figure 9: Global Parameters Tab
c. Setup: The Setup tab is comprised of five (5) subsections:
- Quick Test Setup: Change / Save maximum Quick Test (QT) run temperature. Maximum Quick
Test Temperature is 370 °C. NOTE: The user must set this prescribed end point prior to running
a quick test. The set maximum run temperature is solely at the user's discretion.
- LIMS Port Setup: Change / Save the type of port, either RS232 or Ethernet, to connect to LIMS
- LIMS Path Setup: Change / Save path in which to export data to LIMS
- Standard Test Parameters: Change / Save minimum temperature in which the instrument lift
can open safely and the temperature in which the cooling fan can be turned off
- Inst ID Setup: Change / Save Instrument ID
Figure 10: Setup Tab
d. Miscellaneous: The Miscellaneous tab is comprised of five (5) subsections:
- Access Factory Setting: Allows access to Factory Setting Menu. This function is only activated
when logged in under Factory Login. Details on the Factory Menu can be found in section ___.
- Software Update: This function is only activated when a USB is connected to the analyzer with
a software update file. Software can be updated to most current version when this function is
accessed
- Instrument:
- Help:
- Version: Displays the Model number, Firmware Version and PC Software Version
Figure 11: Miscellaneous Tab
To Next Page
Loading...
