Displays the total number of steps, calorie consumption and distance
travelled on the day. It can also be viewed in the app after connecting to the
watch.
Long press the button for 5 seconds while on this page and the icon will
change dynamically. The light on the back of the watch will start flashing,
indicating that the heart rate measurement will begin.
When measuring, about 15 seconds later, the heart rate data will be updated
in real time, and after 40 seconds, the watch will stop the measurement
automatically. The watch will then return to the home screen automatically.
Note: during measurement, do not move and do not change the interface.
Long press the button for 5 second and the watch will start to measure
blood pressure.
After about 1 min, the watch will stop the measurement automatically and
display results. The watch will then return to the home screen automatically.
Note: during measurement, do not move and do not change the interface.
To Next Page
Loading...
