TP-6805 8/15128 Section 7 Disassembly/Reassembly
5. Remove the right-side panel:
a. Remove two nuts on each side (total of four
nuts). See Figure 7-4.
b. Remove one screw near the controller area.
c. Pull the right-side panel up and off.
1
1. Remove 4 nuts inside the enclosure (2 left and 2 right).
2. Remove screw.
1
Note: Part of the right side panel is cut away
in this view to reveal the fasteners.
2
GM72523
Figure 7-4 Right Side Panel
To Next Page
Loading...
