Kohler 20RESD Operation

TP-6880 10/1438 Section 3 RDC2 Controller Operation
3.11 Generator Metering Menu
The generator metering menu displays the generator
voltage and frequency. See Figure 3-12.
Voltage Calibration
Hazardous voltage.
Will cause severe injury or death.
This equipment must be installed and
serviced by qualified electrical
personnel.
DANGER
The voltage calibration mode can be entered from the
Generator Metering menu. Contact a Kohler-authorized
distributor/dealer for service.
The Reset Calibration menu allows you to set the
voltage reading back to the original value after
calibration, if necessary. See Figure 3-12.
Volts L1--L2:
240 V
Volts L2--L3:
240 V
Volts L3--L1:
240 V
Generator ---->
Metering
Reset
Calibration
<---- Return
Reset
Calib? No
Volts:
240 V
Three-phase
Single-phase
tp6810
Reset
Calib? Yes
Frequency:
60.0 Hz
Frequency:
60.0 Hz
Note: Actual settings may vary.
Figure 3-12 Generator Metering Menu

Kohler 20RESD Specifications

General

Brand	Kohler
Model	20RESD
Category	Portable Generator
Language	English