J
Jacob SmithSep 7, 2025
What to do if Kohler Marine Equipment controller master switch is in OFF/RESET position?
- MmelissawrightSep 7, 2025
If the controller master switch is in the OFF/RESET position, move it to the RUN or AUTO position.
To Next PageTo Next PageWhat to do if Kohler Marine Equipment controller master switch is in OFF/RESET position?
If the controller master switch is in the OFF/RESET position, move it to the RUN or AUTO position.
What to do if Kohler Marine Equipment fuel tank is empty?
If the fuel tank is empty or the fuel valve is shut off, add fuel and move the fuel valve to the ON position.
What to do if Kohler Marine Equipment controller fuse blown?
If the controller fuse is blown, replace it. If the fuse blows again, troubleshoot the controller.
What to do if Kohler Marine Equipment oil level low?
If the oil level is low, restore it and inspect the generator set for oil leaks.
What to do if AC output circuit breaker open in Kohler 40EFOZ Marine Equipment?
If the AC output circuit breaker is open, reset the breaker and check for AC voltage at the generator side of the circuit breaker.
How to clean seawater strainer in Kohler 40EFOZ Marine Equipment?
To resolve a clogged or restricted seawater strainer, clean the strainer.
What to do if Kohler 40EFOZ Marine Equipment controller master or start/stop switch inoperative?
If the controller master or start/stop switch is inoperative, replace it.
What to do if Kohler Marine Equipment cooling water pump inoperative?
If the cooling water pump is inoperative, replace the water pump.
What to do if Kohler Marine Equipment has exhaust system leak?
If there is an exhaust system leak, inspect the exhaust system and tighten the loose exhaust system components.
How to reset fault switches on Kohler 40EFOZ?
If there is a fault shutdown, reset the fault switches and troubleshoot the controller.
General| Brand | Kohler |
|---|---|
| Model | 40EFOZ |
| Category | Marine Equipment |
| Language | English |
