Kohler Courage XT-6 - Page 35

5.9
Section 5
Fuel System and Governor
5
rapidly, so a reduction in speed is hardly noticed. As
ȱȱȱȱȱĴǰȱȱȱ
spring tension and the force applied by the regulating
pin will again be in equilibrium. This maintains
the engine speed at a relatively constant level. The
ȱȱĴȱȱȱ¢ȱȱȱ
ȱȱĴȱǯȱȱȱȱȱȱǰȱ
depending on the application.
Initial Governor Adjustment
ȱȱȱȱȱȱȱ
ȱȱȱȱȱȱȱȱĞǯȱȱ
ȱȱǰȱȱȱȱĴȱ
ȱȱȱȱȱȱȱȱȱȱ
Ĵȱȱȱȱǯȱ
ȱ ŗǯȱ ȱȱȱȱȱǯȱȱ
ȱśȬŗşǯȱ
Figure 5-19. Loosen Governor Lever.
2. Move the governor lever away from the
ȱǻȱȱĴǼǯȱȱȱśȬŗşǯȱ
Do notȱ¢ȱ¡ȱȱȱ¢ȱĚ¡ȱȱȱ
ȱĴȱǯ
ȱ řǯȱ ȱȱȱĞȱȱȱȱȱȱȱ
Ğȱclockwise as far as it will go. Then torque
the hex nut to 9.5 N·m (84 in. lb.)ǯȱȱȱśȬ
20.
Figure 5-20. Adjust Governor Lever.