8.13
Section 8
Disassembly
8
ȱ Řǯȱ ȱȱȱȱȱȱĞǯȱ
See Figure 8-50.
Remove Tappets
ȱ ŗǯȱ ȱȱǯȱȱȱȱȱȱ
EXHAUST for reinstallation. See Figure 8-51.
Figure 8-49. Removing Governor Gear, Retainer.
Figure 8-50. Removing Governor Hitchpin, Shaft.
Figure 8-51. Removing Tappets.
Retainer
Gear
Remove Connecting Rod Cap
ȱ ŗǯȱ ȱȱĞȱȱȱȱȱȱȱ
¡ȱĚȱȱȱȱȱȱǯȱȱ
Figure 8-52. Remove the screws and cap.
Figure 8-52. Removing Connecting Rod Cap.
Figure 8-53. Removing Piston.
Remove Piston
ȱ ŗǯȱ ¢ȱȱȱȱȱȱĴȱ
connecting rod out of the cylinder bore. See
Figure 8-53.
Remove Crankshaft
ȱ ŗǯȱ ȱȱĞǯȱȱȱŞȬśŚǯ
Figure 8-54. Removing Crankshaft.
Hitchpin
Governor
Shaft