Kohler Courage XT-6 - Page 80

10.14
Section 10
Reassembly
Figure 10-52. Installing Air Cleaner.
Figure 10-51. Attaching Breather Hose.
3. Slide the air cleaner base onto the carburetor
ǯȱĴȱȱȱ¢ȱ¢ȱȱȱ
ȱ¡ȱȱȱȱǰȱȱȱ¡ȱĚȱ
screw into the crankcase. See Figure 10-50.
ȱ Śǯȱ Ĵȱȱȱȱȱȱǯȱȱ
Figure 10-51.
Figure 10-50. Installing Air Cleaner Base.
6. Install the paper element and the foam precleaner
(if equipped) into the air cleaner body. See Figure
ŗŖȬśŘǯȱĴȱȱȱȱȱǯ
5. Secure the air cleaner base by torquing the two
¡ȱȱȱȱ¡ȱĚȱȱȱ
8 N·m (71 in. lb.).
Install Dipstick Tube
1. Install the dipstick tube to the crankcase. See
Figure 10-53.
ȱ Řǯȱ ȱȱ¡ȱĚȱȱ 8 N·m (71 in. lb.).
Figure 10-53. Installing Dipstick Tube.
Hex Nuts
Hex Flange
Screw